Accessories

GSM Switch Socket

Monitor and control the power supply of your BATmode-System remotely

^€100

excl. VAT & shipping

The GSM switch socket DRH-301 V3 Master of GSM-One allows you to monitor the power supply of your BATmode-System remotely. In case of power failure as well as at return of power supply you will receive a SMS. If necessary, your BATmode-System can also be restarted via SMS.

Precipitation sensor

Use your BATmode-System to acquire precipitation data

^€750

excl. VAT & shipping

The precipitation sensor from Thies Clima is delivered bundled with a power supply and connection cables with a length of 5m to make the installation in the wind power plant as simple as possible.

Earthing cable for BATbox

Expand the protective earthing of your BATbox S

^€18

excl. VAT & shipping

Protect your BATbox S against voltage peaks e.g. caused by lightning strikes in addition to the existing earthing via the power plug by using this earthing cable (length: 3m).

Cable extension set

Extend your versatility of installation of your BATmode-System

^€120

excl. VAT & shipping

The cable extension set includes all required cables between the two discs and the BATmode extended from 2m to 5m. Futher cable lengths are available on request.

WIFI antenna (large)

Improve WIFI performance for very high wind turbines

^€80

excl. VAT & shipping

By connecting the WIFI directional antenna (gain: 14dBi) and the bundled WIFI-USB-Adapter to a PC at the tower base, you can extand the range and bandwidth of the WIFI connection for remote access on the BATmode-System.

WIFI antenna (small)

Improve WIFI performance for high wind turbines

^€50

excl. VAT & shipping

By connecting the WIFI directional antenna (gain: 9dBi) and the bundled WIFI-USB-Adapter to a PC at the tower base, you can extand the range and bandwidth of the WIFI connection for remote access on the BATmode-System.

DIN rail mounting kit

Extend the mounting possibilities of your BATmode-System

^€50

excl. VAT & shipping

With the DIN rail mounting kit you can mount your BATmode-System simple and safe on DIN rails. The DIN rail adapters are attached on the bottom of the BATmode.

Hole Cover

Close the holes of the sensor discs in the nacelle floor safely and easily

^€45

excl. VAT & shipping

With this cover disc and the related sealing ring, the hole in the nacelle floor, which is necessary for the installation of the microphone or antenna disc, can be reclosed safely and easily - temporarily over the winter or permanently after completion of the nacelle monitoring.

Microphone Calibration

Calibrate your BATmode-System to obtain significant recording results

^€45

excl. VAT & shipping

To acquire correct data for the identification of shutdown times it is essential to determine bat activity with calibrated microphones. Due to weather conditions and the resulting variations in microphone sensitivity we recommend to recalibrate your system after each monitoring period.

Included Services:

Determination of microphone sensitivity

Determination of test signal speaker level

Issue of a calibration certificate